Important Safeguards For Electrical Appliances - Gastroback DESIGN TISCHGRILL ADVANCED PRO BBQ Bedienungsanleitung

• Immediately after operation, take any leftovers from the grilling plate.
Do not leave any food dry on the appliance. Always clean the appli-
ance after each use to prevent a build-up of baked-on foods (see:
'Care and Cleaning'). Do not use any food that is probably off.
Always keep the appliance and the accessories clean.

IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES

The appliance is heated electrically. Place the appliance near a suitable
wall power outlet to connect the appliance to a separately installed, pro-
tected mains power supply with protective conductor (earth/ground) con-
nected properly. Ensure that the rating of your mains power supply cor-
responds to the requirements of the appliance (220 - 240 V, 50/60 Hz,
AC, rated for at least 16 A).
The installation of a residual current operated circuit breaker (r.c.c.b.)
with a maximum rated residual operating current of 30 mA in the supp-
lying electrical circuit is strongly recommended. If in doubt, contact your
electrician for further information. In various foreign countries, the specifi-
cations for power supplies are subject to incompatible norms. Therefore it
is possible that power supplies in foreign countries do not meet the requi-
rements for safe operation of the appliance. Thus, before operating the
appliance abroad, ensure that safe operation is possible.
• Do not use any multi socket outlet, external timer, or remote con-
trol systems. The power outlet used must be accessible at any time to
enable disconnecting the appliance in any case of danger or malfunc-
tion. We recommend to avoid the usage of an extension cord. Never-
theless, if you wish to use an extension cord, it must be connected
properly with live, neutral and protective ground conductor and a
permanent loading range of at least 16 A. Ensure that no tension is
applied to any part of the power cords. To disconnect: First, unplug
the extension cord from the power supply. Always grasp the plug for
disconnecting power cords.
• Always handle power cords with care. Always completely unwind
the power cords before use to avoid risk of overheating, fire, and
electric shock.
EN
41