Plugging In And Ironing; Steam Ironing - Silvercrest SDB 2400 F4 Bedienungsanleitung

Plugging in and ironing

Dry ironing without steam is possible at all temperatures, steam ironing is only
possible from the setting range
1) Insert the plug into a mains power socket.
CAUTION – PROPERTY DAMAGE!
► If the clothing care instructions forbid ironing (
be ironed. Ignoring this warning could lead to permanent damage to the
clothing item.
2) Check the care instructions on the labels in garments to see if they are suitable
for being ironed, and at which temperature setting.
Temperature control
3) Select the appropriate temperature setting with the temperature control
NOTE
► Always place the iron on the base
iron on the sole of the iron
will be activated after 30 seconds (see section Automatic switch-off)
and the appliance stops heating up.
■ The temperature control lamp
reached, the temperature control lamp
4) Wait until the temperature control lamp
■ To moisten the laundry, press the spray button
■ This function is suitable for very dry and very crumpled garments.

Steam ironing

1) Set the steam control
2) The temperature control
Otherwise no steam will be produced.
■ 22 │ GB │ IE
symbol
to the desired steam setting.
must be set to at least the
on the temperature control
), the garment must not
Material type
Synthetics
Silk, wool
Cotton, linen
while it heats up. If you place the
and do not move it, the automatic switch-off
lights up. When the set temperature has been
goes out.
goes out.
.
.
.
setting.
SDB 2400 F4