Operating Elements; Before First Use - Silvercrest SDB 2400 F4 Bedienungsanleitung

Operating elements

Figure A:
Water jet
Filler opening for the water tank
Steam control
Steam blast button
Spray button
Control lamp for the automatic switch-off
Temperature control lamp
Temperature regulator
Power cable with anti-kink protection
Base
Sole of the iron
Self-clean button
Figure B:
Measuring beaker
Before first use
1) Remove the steam iron from the packaging.
2) Remove all stickers and protective films from the steam iron and from sole of
the iron
RISK OF SUFFOCATION!
► Plastic bags may pose a risk. To avoid the risks of asphyxiation, keep
plastic bags out of the reach of toddlers and small children.
3) Fill the water tank with water (See the section Filling the water tank).
4) Insert the plug into a mains power socket supplying an electrical current as
detailed on the rating plate.
5) Move the temperature control
6) Heat the steam iron up for several minutes at the highest setting.
7) Activate the steam blast button
out of the sole of the iron
8) Then iron over a piece of old piece of material to remove any residues that
may remain on the sole of the iron
■ 20 │ GB │ IE
.
.
to the "MAX" position.
a couple of times so that steam comes
.
SDB 2400 F4