Filling The Water Tank - Silvercrest SDB 2400 F4 Bedienungsanleitung

Filling the water tank

1) Hold the iron in your hand at an angle.
2) Open the cover of the filler opening for the water tank
3) Using the measuring beaker
marking, but no further.
4) Close the cover of the filler opening for the water tank
NOTE
► If the mains water in your location is rated as hard, we recommend that
you mix the mains water with some distilled water. Otherwise, the jets for
the steam blast function could become blocked with limescale prematurely.
To extend the optimal steam blast function, mix mains water with distilled
water according to the table.
Water hardness
The water hardness level can be queried at your local water works.
SDB 2400 F4
very soft/soft
medium
hard
very hard
, fill the water tank with water to the "MAX"
Ratio of distilled water to tap water
1: 1
2: 1
3: 1
.
.
0
GB │ IE │
21 ■