Filling The Water Tank; Plugging In And Ironing - Silvercrest SDBR 420 A1 Bedienungsanleitung

Filling the water tank

1) Place the iron on a level surface.
2) Open the cover on the water tank
3) Fill the measuring cup
and fill this water into the water tank.
4) Close the cover on the water tank
5) Raise the iron vertically. You can read off the maximum water
level at the inspection openings

Plugging in and ironing

Dry ironing without steam is possible at all temperatures; steam
ironing is only possible above the setting range
temperature control
1) Insert the plug into a mains power socket.
CAUTION! PROPERTY DAMAGE!
► Before you connect the steam iron to the power supply, always
ensure that the correct voltage has been set on the voltage
switch (see section Before first use).
► If the clothing care instructions forbid ironing (
garment may not be ironed. Ignoring this warning could lead
to permanent damage to the clothing item.
2) Check the care instructions on the garment labels to see if they
are suitable for being ironed and at which temperature setting.
│ GB │ IE │ NI │ CY
■ 12
up to the MAX marking with tap water
.
.
filler opening.
filler opening.
/MAX on the
), the
SDBR 420 A1