Symbols Used; For Your Safety; Target Groups; Intended Use - Mennekes Premium* 3,7 Betriebs Und Installationsanleitung

1.3

Symbols used

Only a qualified electrician may carry out opera-
tions marked with this symbol.
This symbol indicates an important note.
The symbol indicates additional, useful informati-
on.
f This symbol marks a prompt for action.
„ This symbol marks a listing.
Î This symbol is used to refer to another section in this
manual.
This symbol is used to refer to another document.

9 This symbol is used to point out a result.

2. For your safety

2.1

Target groups

Operator
As the operator, you are responsible for the device.
You are responsible for proper and safe use of the device.
This includes instructing persons who use the device.
As an operator without specialist electrical training, you
may only carry out activities that do not require a qualified
electrician.
Electrician
As a qualified electrician, you have received
recognised electrotechnical training. Based on
this knowledge, you are authorised to carry
out the electrotechnical work requested in this
manual.
Requirements for qualified electricians:
„ Knowledge of general and special regulations pertai-
ning to safety and accident prevention.
„ Knowledge of electrotechnical regulations.
„ Knowledge of national regulations.
„ Ability to identify risks and avoid possible hazards.

2.2 Intended use

MENNEKES charging stations are charging systems for use
in public areas.
The charging stations are used exclusively for recharging
electric vehicles.
„ Mode 3 charging according to IEC 61851-1.
„ Mode 1 charging according to IEC 61851-1.
„ Plugs and sockets according to IEC 62196.
The charging station is intended solely for fixed installation.
EN
3