Operations; Straight Weighing; Re-Zero Function; Tare Function - Mettler Toledo Mini-Tiger Bedienungsanleitung

METTLER TOLEDO

Operations

Straight weighing

Place the item to be weighed on the platter.
Enter the unit price (The price to pay will come up in the total price display simultaneously).
Remove the item from the platter, all displays will return to 0.

Re-zero function

There are two ways to re-zero the scale:
1. Power-up Zero
2. Push button Zero
☞ Power-up Zero
The scale will automatically capture zero when it is turned on. The power-up zero capture range is +/-10% of the
scale capacity. When the scale is turned on with a weight on the platter of more than +/-10% of the capacity, the
scale will not capture zero (the weight display will show "-----") and the scale will not be ready for use. After removing
the weight the scale will capture "zero".
>0<
☞ Pushbutton Zero
The ZERO key re-zeros the scale over a range of +/-2% of the scale capacity. To use this function, the scale must
be in the gross weighing mode(NET cursor must be off) and in a no motion condition. When the weight on the platter
is more then +/-2% of the scale capacity the depression of the zero key will not be accepted.

Tare Function

The Tare key subtracts the weight of the wrapping material.
☞ Pushbutton Tare
>T<
Place the empty container or wrapping material on the platter.
>T<
Press key.
Place the item to be weighed in the container or on the wrapping material and then onto the platter.
Enter the unit price.
Remove the weighed item, as well as the container or wrapping material from the platter, the displays will show all
0.

PLU (Price Look Up) Function

The PLU function stores 25 PLU's in the scale's memory. They can be used for frequently sold goods, where the prices
can be looked up by simply entering the PLU number.
☞ Storing a PLU
Enter the required unit price.
Press and hold the PLU key until two beeps is heard.
In the weight display appears: "PLU".
Enter the PLU number (between 1 and 25) and wait for approx. 3 seconds, until the scale beeps twice.
☞ Recalling a PLU
PLU PLU
Press the key followed by the desired one or two-digit number. The stored unit price will appear in the unit price
display.

Power Saving Feature

Power saving feature is used to save battery power.
When using the battery and the scale is idle for 2 minutes, both the price and total price displays will turn off, the
weight display will only display one 0 on the right and the battery in use cursor is lit. This indicates that the scale
is in the power saving cycle. When weight is placed on the platter or a key is pressed, the scale will wake up
Mini-Tiger
GB
7