Switching Off The Scale; Measuring Length (Optional) - Seca 232 n Gebrauchsanweisung Und Garantieerklärung

Switching off the scale

5.2 Measuring length (optional)

54 •
The symbol and the "HOLD" message are no longer displayed.
appears in the display. If required, you can perform another weighing
operation.
►
Press the Start key.
NOTE
In battery mode, the scale remains on standby for 60 seconds. If there
is no input during standby time, the scale switches off automatically.
Standby time can be adjusted (see "Setting standby time (AOff)" on
page 59).
WARNING!
Injury from falling
Baby scales generally stand on raised work surfaces. If the baby falls
from this surface, this may result in serious irreversible or fatal injuries.
►
Ensure that the device is steady and level.
►
Route connecting cables (if present) in such a way that people
cannot trip over them.
►
Never leave a baby unsupervised.
CAUTION!
Injury from crushing
The baby's hands and feet can be crushed by the moving parts of the
measuring rod.
►
When moving the measuring rod, ensure that neither the baby's
hands nor feet are resting on the measuring rod.
NOTICE!
Incorrect measurement as a result of force shunt
Operation of the measuring rod affects the weight display of the scale.
Weight values which are displayed during a length measurement do
not correspond to the patient's actual weight.
►
Ensure that you do not touch the scale whilst weight is being
measured.
►
Only read off weight values before or after measuring length.
NOTICE!
Damage to device from incorrect handling
The measuring rod is not a carrying aid. The measuring rod can
become deformed, difficult to move or come off the scale as a result
of high strain.
►
Pick up the scale only by the carrying handle if you are transporting
it.
0.000