Cable Routing Diagram - Yamaha FJR1300AP Ergänzende Wartungsanleitung

CABLE ROUTING DIAGRAM

A
A
1. Lower cowling
2. Wire harness assembly
3. Siren sub-lead
4. Engine guard
5. Siren bracket
6. Siren
7. Speaker
8. Speaker lead
9. Engine guard bracket
10. Plastic band (L = 108.5 mm)
A. Connect the siren sub-lead to the wire har-
ness assembly. Leave the coupler on the
inside of the lower cowling.
B. Route the siren sub-lead between the siren
bracket and engine guard.
C. Route the speaker lead between the siren
bracket and engine guard.
RECOMMENDED SPECIFICATIONS
B
D. Connect the speaker lead to the wire har-
ness assembly. Leave the coupler on the
inside of the lower cowling.
E. Clamp the wire harness assembly to the
engine guard bracket. Face the end of the
plastic locking tie downward, angled back-
ward. Do not cut off the excess end of the
plastic band.
34
B