Operation - Chattanooga VitalStim Plus Kurzanleitung

VitalStim® Plus Electrotherapy System
1. Electrode Placement Icon
2. Modality Description Icon
3. Time Icon
Press the Time icon to adjust therapy time/duration .
4. Remote Icon
Changes color to white when Remote Control is inserted and
to blue when Remote button is pressed and current is being
delivered .
5. 4 Channel Icons
This icon shows the modalities in use .
6. Therapy Information Window
View selected Therapy information such as Waveform, Cycle
Time, Frequency, in the Therapy Information Window .
7. Customize Icon
Press the "Customize" icon to edit the therapy information .
VITALSTIM TREATMENT
1) Insert leadwire connectors for Channel 1 (CH1) and/or Channel 2
(CH2), Channel (CH3) and Channel 4 (CH4)
2) After electrodes are placed on the patient, press the ON/OFF
button once to turn on the device .
3) Select the VitalStim button from the Home Screen to access the
VitalStim treatment .
4) Press the Time button to select treatment time .
5) Increase or decrease the treatment time as prescribed and select
the check mark button .
6) Press Channel (CH1), Channel 2 (CH2), Channel 3 (CH3) or
Channel 4 (CH4) on the touch screen to activate desired
channels .
7) Set the appropriate level of intensity by using the (+) and (-)
buttons for each channel and the treatment will start . Set the
intensity level for each channel individually .
7
VMS TREATMENT
1) After electrodes are placed on the patient, press the VMS Button
to access the VMS treatment
2) Select the Custom Protocol Button .
3) Select the Customize Parameters Button

OPERATION