Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
The day flashes on the display.
-
+
• Use the
/
function buttons to select the
relevant day and confirm using the SET
setting button.
If the hour format is set as 12h, the day/month
display sequence is reversed.
The hour flashes on the display.
-
+
• Using the
/
function buttons, select the
relevant hour and confirm using the SET
setting button.
The minute flashes on the display.
-
+
• Using the
/
function buttons, select the
relevant minute and confirm using the SET
setting button.
Operation with the mains part
You can also operate this device with a mains part (not
included in delivery). The mains part can be obtained from
specialist retailers or from the service address using order
number 071.95. However, before connecting the device with
the mains part, please ensure that you have removed the
batteries from the device. During mains operation, there must
not be any batteries in the battery compartment, as this could
damage the device.
• To avoid any potential damage, the device may only be
operated with a mains part that meets the specifications
described in chapter "Technical specifications".
• Furthermore, the mains part must only be connected to
the mains voltage that is specified on the type plate.
• Insert the mains part into the connection provided for
this purpose on the right-hand side of the blood pressure
monitor.
• Then insert the mains plug of the mains part into the mains
socket.
• After using the blood pressure monitor, unplug the mains
part from the mains socket first and then disconnect it from
the blood pressure monitor. As soon as you unplug the
mains part, the blood pressure monitor loses the date and
time setting but the saved measured values are retained.

7. Usage

Please ensure the unit is at room temperature before
measuring. The measurement can be performed on the left or
right arm. Circulation in the arm must not be restricted by tight
clothing or similar.
Attaching the cuff
1. Place the cuff onto the
bare upper arm. Press the
bracket together using
your fingers, in such a
way that the area where
the upper arm should be
placed opens.
26

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis