Beurer BM 51 easyClip Gebrauchsanweisung Seite 33

Memory 2 x 100 memory spaces
Dimensions L 138 mm x W 103 mm x H 44 mm
Weight Approximately 571 g
(without batteries, with cuff)
Cuff size 22 to 42 cm
Permissible operating + 10 °C to + 40 °C, ≤ 85 % relative
conditions humidity (non-condensing),
700 hPa–1060 hPa environmental
pressure
Permissible storage - 20 °C to + 50 °C, ≤ 85 % relative
conditions humidity (non-condensing),
700 hPa–1060 hPa environmental
pressure
Power supply 4 x 1.5 V
Battery life For approx. 500 measurements,
depending on levels of blood pressure
and inflation pressure
Classification Internal supply, IP22, no AP or APG,
continuous operation, application part
type BF
The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notification
to allow for updates.
AA batteries
33
• This device complies with the European standard EN 60601-1-2
(in compliance with CISPR 11, IEC 61000-4-2, IEC 61000-4-3,
and IEC 61000-4-8) and is subject to special precautionary
measures with regard to electromagnetic compatibility.
Please note that portable and mobile HF communication
systems may interfere with this device.
• This device complies with the EU Medical Devices
Directive 93/42/EEC, the German Medical Devices
Act (Medizinproduktgesetz) and the standards
EN 1060-1 (Non- invasive sphygmomanometers –
Part 1: General requirements), EN1060-3 (Non-invasive
sphygmomanometers – Part 3: Supplementary requirements
for electro-mechanical blood pressure measuring systems)
and IEC IEC 80601-2-30 (Medical electrical equipment –
Part 2 – 30: Particular requirements for the basic safety
and essential performance of automated non-invasive
sphygmomanometers).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long useful
life. If the device is used for commercial medical purposes, it
must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested
from the service address.