Regular Maintenance - Stiga RECYCLING VE32 Gebrauchsanweisung

EN
6 MAINTENANCE
The machine must always be disconnect-
ed from power when carrying out mainte-
nance or repairs. Risk of crushing injuries
and fatal electric shocks.

6.1 Regular maintenance

The machine requires no regular maintenance oth-
er than cleaning, as described above.
6.2 Adjusting drive belt
1. Remove the belt cover and the motor casing by
unscrewing the 5 screws in fig. 5.
2. Remove the inner motor casing.
3. Undo the motor's adjustment screws. See fig. 6.
4. Push the motor forwards until the belt is cor-
rectly tensioned. Check that the engine is ten-
sioned equally on both sides.
5. Tighten the motor's adjustment screws.
6. Reassemble the casings and covers. See fig. 5.
26
ENGLISH
7 RECYCLING
Waste management in accordance with
the WEEE Directive (2002/96/EC)
Take care of the environment!
Do not discard with household
waste!
This product contains electrical
and electronic components that
must be recycled.
Hand the product in for recycling
at the indicated location, e.g. the
municipal recycling station.