Switching The Handset On/Off; Enabling/Disabling The Keypad Lock - Auerswald COMfortel M-520 Betriebsanleitung

8 R key
- query call (flash. Press for a short time)
- insert a dialling pause (press for a long time)
9 Micro USB connection for exchanging data between the handset and PC
10 Star key (function varies depending on situation):
Function varies depending on situation: when a connection is present, switch between
pulse dialling and tone dialling (press for a short time), during text input, open the
special characters table
11 Headset port (2.5 mm jack)
12 Keypad (here: Key 1)
Use this to call up the voicemail function on the PBX (if configured: press for a long
time)
13 Accept key/Hands-free key
Function varies depending on situation: dial displayed number, accept call, switch
between receiver operation and hands-free operation, open the Redial List (press for a
short time), start dialling (press for a long time)
14 Profile key
Use this to switch between sound profiles
15 Control key/Menu key
Function varies depending on situation: Use this to navigate in menus and input fields

Switching the handset on/off

Switching on:
Switching off:

Enabling/disabling the keypad lock

The keypad lock prevents the telephone from operating unintentionally. If the
handset is secured with a PIN, you need that PIN to unlock it. When delivered,
the PIN is set to "0000".
Switching on:
Switching off:
Note: If a call is signalled on the handset, the keypad lock is automatically
disabled. You can accept the call.
When the keypad lock is enabled, you cannot call emergency phone
numbers either.
COMfortel M-520 - Instructions V01 04/2019
On the switched-off handset, press the Disconnect key
a long time.
When the switched-off handset is in an idle state, press the
Disconnect key
Press for a long time.
Press for a long time. Use the
PIN (if it is not 0000)
for a long time.
Using the Telephone
for
to enter the handset
25