Safety Instructions; Symbols And Icons; Symbols In The Manual - Parkside PDOS 200 B2 Originalbetriebsanleitung

G B I E N I
Sound power level (L
measured ............. 93 dB(A); K
Vibration total value (a
* A break is introduced after 30 minutes of
uninterrupted operating duration until the de-
vice temperature differs 2 K (2°C) less than
room temperature.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
also be used for a preliminary exposure
assessment.
Warning!
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety Instructions

When using power tools, observe
the following basic safety measures
for the prevention of electric shocks
6
CY
)
WA
= 3 dB
WA
) ......... 2.5 m/s
h
Please read all these instructions
before using the electric tools and
please keep the safety instructions.
2

Symbols and icons

Symbols in the manual:

Warning symbols with in-
formation on damage and
injury prevention.
on preventing damage.
Connect the machine
to the power supply.
Pull out the mains plug.
Help symbols with information on
improving tool handling.
Symbols on the device:
Keep hands away.
from the mains before carrying out
maintenance and repair work.
Read the instruction manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Wear cut-resistant gloves.