Sawing Techniques; Sawing Off Larger Branches; Sawing Off Small Branches; Sawing Off Parts - FLORABEST FHE 550 Bedienungs- Und Sicherheitshinweise

Sawing techniques

Be thoroughly aware of the danger of rebounding branches.

Sawing Off Larger Branches

For controlled sawing of larger branches, first
select a relief cut.
This – labelled a in the adjacent illustration –
is made from below.
Saw a notch in the lower third of the branch.
The actual length cut (b) is again made from
the top, as far as possible in line with the first
cut so that the two cuts meet.

Sawing Off Small Branches

Set your saw cut from top to bottom, as il-
lustrated below.
Be aware of early breaking of the branch if
you have underestimated the size and weight.
Be completely aware of the falling cut material

Sawing Off Parts

For large/long branches, sawing off in parts is
recommended.
This is the only way to safely ensure the point
of impact of the cut material.
Clear away from the area in which you are
standing any parts that have already been cut
and are lying on the ground.
GB MT
53