General Notes On Safety; Electric Safety - FLORABEST FHE 550 Bedienungs- Und Sicherheitshinweise

Danger of death by electrocution!
Keep at least 10m away from power
10 m
lines.
Caution! Remove the plug immediately
from the plug socket in case of da-
mage or cutting through of the mains
cable
Information of the acoustic power level
104
L in dB.
WA
Safety class II
Machines do not belong with domestic
waste.

General notes on safety

Before you do any work with the high
pruning saw, make yourself familiar
with all operating parts. Practise using
the saw (sawing logs on a sawhorse)
and get an experienced user or a spe-
cialist to explain to you the function of
the saw, the way of working, the tech-
niques of sawing and the personal pro-
tection equipment.
Also, read the following safety instruc-
tions in order to prevent injury to peo-
ple and damage to property:
Observe noise protection and other local
regulations.

Electric safety:

Read the safety instructions in order to
avoid injuries and material damage.
Protection against of electric shock:
• Connect the high pruning saw only to a
plug socket with leakage-current-operated
circuit breaker (l.c.o. circuit breaker) with a
rated current of not more than 30 mA.
• Make sure that the mains voltage agrees
with the information of the label.
• Protect the device against moisture. The
device must not be wet and should not be
operated in a moist environment.
• Check the device and the power cable with
plug for damage before every use. Avoid
body contact with earthed parts (e.g. metal
fences, metal posts).
• Employ only extension cords, which are
stipulated for use in the open air. The flex-
ible lead cross-section of the extension
cord must be at least 1.0 mm
a cable drum completely out before use.
Check the cable for damages.
• Damaged cables, coupling and plugs or
connecting leads, not corresponding to the
specifications, must be not be employed.
Remove the plug immediately from the plug
socket in case of damage or cutting through
of the mains cable.
•
If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent of
the same or a similarly qualified person in
order to prevent hazards.
Working with the high pruning saw:
• When felling timber, observe noise protec-
tion and other local regulations.
Local rules may render necessary a suit-
ability test. Ask the forest administration for
details.
• Do not work with the high pruning saw
when you are tired or after the consump-
tion of alcohol or medication. Always take a
break in good time.
• Always wear suitable working clothes during
working, which allow freedom of movement.
Included with this are a safety helmet, ear
muffs, protective goggles or face protection,
gloves with cut-protection, safety shoes with
cut-protection and solid soles and protective
trousers with saw protection.
• The high pruning saw is designed for two-
handed operation. Never work with one
hand or above shoulder height.
GB MT
2 . Always roll
47