Spare Parts; Technical Data - FLORABEST FHE 550 Bedienungs- Und Sicherheitshinweise

the motor block in the rear part of the original
box. Cut off the thinner front part, making sure
that the box keeps its rectangular form, and
carefully seal up the box on this side.
The sender carries the costs of postage and
packing.
Caution: Please, in no case, send defective
devices with filled oil tank. Completely empty
the tank. Possible material damages (oil runs
out if device is placed on its side or upside
down!) and/or fire damages during transport
are borne at the expense of the sender.
Devices sent in with freight collect - by
bulk freight, express or with other special
freight - are not accepted.
If you have a justified guarantee claim, please
contact our service centre by telephone,
which will then advise you on how the claim
will be processed.
We will dispose of tools free of charge.

Spare parts

The following spares are available from Grizzly
Service-Center (see P. 74 for the address).
Please indicate the machine type and the
number of the spare part with your order.
Saw chain ...................................... 3009 1400
Chain bar ....................................... 3010 0100
Bio chain oil 1 liter ......................... 3023 0001
Bio chain oil 5 liter ......................... 3023 0002
If further spare parts should be necessary, please
find the part number on the exploded drawings.

Technical Data

High pruning saw ........................... FHE 550
Rated input voltage................... 230V~, 50 Hz
Input power ...........................................550 W
Safety class ..............................................
Chain speed ......................................10,8 m/s
Weight (without guide rail and chain) ....3,7 kg
Weight (with guide rail and chain) .........4,1 kg
Oiltank ....................................................70 ml
Chain ..................................Oregon 91 P040X
Chain pitch....................................................3/8"
Chain bar ......... 10" Oregon OE 100SDEA041
Number of chain drive links ........................... 40
Chain width ......................................... 1,3 mm
Teeth of the sprocket chain wheel ................ 6
Sawing length (max.) ......................... 260 mm
Guaranteed sound power level.... 104,0 dB(A)
Measured sound power level....... 102,2 dB(A)
Acoustic pressure level..................... 88 dB(A)
Vibration (ISO 7505) .......................... 3,0 m/s
Noise and vibration values were determined
according to the standards and stipulations
mentioned in the declaration of conformity.
Technical and optical changes can be car-
ried out in the course of further development
without notice. All dimensions, references
and information of this instruction manual are
therefore without guarantee. Legal claims,
which are made on the basis of the instruction
manual, cannot thus be considered as valid.
GB MT
II
2
55