Sawing Techniques; Sawing Off Larger Branches; Sawing Off Small Branches; Sawing Off Parts - FLORABEST FHE 550 A1 Originalbetriebsanleitung

Sawing techniques

Be thoroughly aware of the danger of rebounding branches.

Sawing Off Larger Branches

For controlled sawing of larger branches,
first select a relief cut.
This – labelled a in the adjacent illustra-
tion – is made from below.
Saw a notch in the lower third of the
branch.
The actual length cut (b) is again made
from the top, as far as possible in line with
the first cut so that the two cuts meet.

Sawing Off Small Branches

Set your saw cut from top to bottom, as
illustrated below.
Be aware of early breaking of the branch
if you have underestimated the size and
weight.
Be completely aware of the falling cut
material

Sawing Off Parts

For large/long branches, sawing off in
parts is recommended.
This is the only way to safely ensure the
point of impact of the cut material.
Clear away from the area in which you are
standing any parts that have already been
cut and are lying on the ground.
GB
13