General Safety Information - FLORABEST BL FBS 25 A1 Originalbetriebsanleitung

G B M T
Specification of the guaranteed
sound power level L
Use ONLY fuel mix
Cutting circle
Start-up Sequence
Fuel pump (Primer)

General Safety Information

Do not allow access by children or by peo-
ple who are ill or infirm. Children must be
carefully supervised when they are in the
area of machinery. Observe the regional
and local accident prevention regulations
applicable where you are. The same ap-
plies for all regulations concerning occupa-
tional safety and health in the workplace.
The manufacturer cannot be held liable if
the machines produced by the same are
modified without permission and if dam-
age to people or property occurs as a
result of such modifications.
5 4
in dB.
WA
Mix ratio 50:1,
Use ONLY fuel mix
Warning! Always take basic
precautions when using ma-
chinery. Please also observe
all tips and information in
the additional safety infor-
mation.
1. Observe the surrounding conditions un-
der which you are working. The motor-
ised equipment produces toxic fumes
as soon as the engine is running. These
gases may be odourless and invisible.
Therefore, never work with the equip-
ment in enclosed or poorly ventilated
spaces. Ensure adequate ventilation
when working. Ensure a safe stance in
the wet, snow and ice, on slopes and
on uneven territory.
2. Do not allow strangers to use the
equipment. Visitors and onlookers –
particularly children and people who
are ill or infirm – must be kept away
from the workplace. Prevent other peo-
ple from coming into contact with the
tools. Do not pass on the equipment
to people who are unfamiliar with the
equipment and its handling.
3. Ensure the safe transport and storage
of the equipment. Always carry the
equipment suspended by the carrying
strap or on the tube. Equipment that
is not in use must be stored in a dry
place as high up as possible or locked
away to be inaccessible.
4. Always use the right tool for any work.
E.g. do not use small tools or acces-
sories for work that should actually be
performed with heavy tools. Use tools
only for the purposes for which they
have been constructed.
5. Ensure appropriate clothing. Clothing
must be appropriate and not impede
you when working. Wear clothing with
cut protection pads.