Sony UP-20 Gebrauchsanweisung Seite 45

3
Select the desired item by pressing the F or f
button.
Example: To select PRN SPEED on the
PRINTER SETUP menu
Position the cursor at PRN SPEED by pressing the F
or f button.
Press the F or f button until PRN SPEED appears.
4
Change the setting by pressing the G or g button.
To change the selection:
Switch the desired selection to green by pressing
the G or g button
.
Note
When / is displayed at both ends of a selection or at
either the right or left end, there are more selections
in this direction. Press the G or g button to display
more selections.
Example: To select HIGH of the PRN SPEED
item on the PRINTER SETUP menu
Switch HIGH to green by pressing the e G or g button.
Display HIGH in capital letters by pressing the G or g
button.
When ****** is displayed at the selection:
****** is displayed when changing the selection is
ineffective. The following table lists the case where
the selection is ineffective.
Selected item Item can not to be
changed (when ****** is
displayed at the
selection)
1 is selected for MULTI SEPARATE
PIX on the LAYOUT (LAYOUT SETUP menu)
SETUP menu.
MOTION CHK
(PRINTER SETUP menu)
RGB is selected for HUE (INPUT SETUP menu)
INPUT SEL on the INPUT
COLOR
a)
SETUP menu .
(INPUT SETUP menu)
ON is selected for RM2 FUNC
IMMED.CAP on the (FUNCTION SETUP menu)
FUNCTION SETUP
menu.
a) Only for the UP-21MD
45
Basic Menu Operations