Adjustment; Functions That Can Be Set On Menus - Sony UP-20 Gebrauchsanweisung

Adjustment

Functions That Can be
Set on Menus
You can set up the printer to meet various specifications.
Once you have adjusted and stored the settings, the
printer operates according to those settings until their
values are modified. You can set up the printer according
to its intended purpose, connected equipment, or your
individual preferences.
You can store up to three settings as a set of user settings,
called user set 1, 2 and 3.
Functions that can be set on those menus are as follows:
Menu Functions to be set
COLOR Adjusting the printout color
ADJUST (color intensity and
contrast) and sharpness
LAYOUT Selecting the memory mode 28
SETUP
Selecting the type of
printout
Selecting whether or not
white borders are added to
multiple reduced images
WINDOW Eliminating the black lines
SETUP produced on the printout
CAPTION Entering a caption
PRINTER Setting the print quantity
SETUP
Adjusting the tone of the
printout
Selecting the print speed
Confirming whether or not
the memory image is
blurred
COLOR Adjusting the color balance 52
BALANCE
SYSTEM SETUP Adjusting the brightness of
the printer window
display
Setting the baud rate for
computer communication
Selecting whether or not the
operation and error tones
sound
Compensating for the level
of the input signal
Registering user settings
USER NAME Editing the user name
42

Functions That Can be Set on Menus

Reference
pages
49
29
34
51
35
24
51
23
33
57
a)
58
57
47
58
58
Menu Functions to be set
FUNCTION Selecting the image which
SETUP appears after storing the
image into memory, the
source image or the
memory image
Selecting the timing of the
pulse signal input to the
REMOTE 2 connector
Assigning the function to
remote control units
connected to the REMOTE
2 connector
Setting the function of the
CLEAR button
INPUT SETUP Selecting the input signal
Compensating for the input
signals
OUTPUT SETUP Erasing the screen display
Matching the video monitor
color to the printout color
Selecting the output signal
from the printer
Selecting whether the
printer synchronizes with
the internal sync signal
included in channel G of
the RGB signals
Selecting whether or not
information about the ink
ribbon is displayed
a) Only for the UP-21MD
Reference
pages
31
56
56
39
20
47
40
48
48
15
a)
58