Inhaltsverzeichnis
Werbung
1. How to use this manual efficiently
1.1 About this manual
This operating manual describes the operation of the LTIC107E-... monitoring module. It is
intended for electrically and electronically skilled persons, especially for planners, installers
and operators of electrical installations in medical locations.
Before using the equipment, please read this operator's manual, the supplement "Important
safety notes for BENDER products" and the instruction leaflets for the individual system com-
ponents. Keep these documents to hand in the vicinity of the equipment.
Should you have any questions which are not covered in the documentation, we will be hap-
py to answer them for you. Please contact our technical sales department. If you are inter-
ested in any on-site service, please don't hesitate to contact our service department.
This manual has been compiled with great care. Nevertheless, errors cannot be entirely ex-
cluded. The BENDER companies do not accept any liability for injuries to persons or dam-
ages to equipment due to errors in this manual.
1.2 Explanation of symbols
The following designations and symbols are used in BENDER documentation for hazards and
warnings:
Danger !
Warning
Caution
TGH1343en/05.2007
This symbol indicates an immediate danger to life and health of persons. Failure
to observe these instructions means that death, serious injury or considerable
damage to property shall occur if the corresponding precautions are not taken.
This symbol indicates a potential danger to life and health of persons. Failure to
observe these instructions means that death, serious bodily injury or considera-
ble damage to property may occur if the corresponding precautions are not tak-
en.
This symbol indicates a potentially dangerous situation. Failure to observe these
instructions means that minor bodily injury or damage to property can occur if
the respective precautions are not taken.
5
Werbung
Inhaltsverzeichnis
