Commissioning, Settings And Verification; Example Of Addressing - Bender MEDICS LTIC107D Bedienungsanleitung

5. Commissioning, settings and verification

A check list is included in "Chapter 8. Factory test certificate, Checklist, diagrams". This list
informs about the individual factory settings of the MEDICS
record all steps which are described in this check list.
The check list consists of:
Visual verification
Commissioning and setting
Functional test
Keep this check list and this operating manual to hand in the vicinity of the MEDICS
ule.

5.1 Example of addressing

Please also refer to the notes in the "BMS bus" instruction leaflet. The setting of the alarm
addresses marked with an asterisk (*) enables mutual monitoring of the signalling and test
combination.
One monitoring module with two remote alarm indicator and operator panels:
TGH1343en/05.2007
LTIC...
Device Parameter
107TD47 Bus Adress
First MK24... Address
Test Address
Alarm Address
Second Address
MK24...
Test Address
Alarm Address
®
module. Please carry out and
MK... MK...
Settings for a
switchover and
monitoring system
3
1
3
*
3, 2
2
3
*
3, 1
®
mod-
25