Switching On And Off; Prior To The Nail Care Process; Filing The Nail Edges (Attachment 1); Smoothing The Nail Surfaces (Attachment 2) - Silvercrest SNPS 1.5 A1 Bedienungsanleitung

6.2 Switching on and off

• Use the slide switch 3 to switch the device on
and off and select the desired speed setting:
- 0 = switched off
- 1 = low speed
- 2 = high speed
WARNING! Risk of material damage!
Only press lightly so the motor will not be over-
loaded and to achieve a uniform result.
NOTE:
• Start with the low speed 1.

6.3 Prior to the nail care process

• Ensure that the nails are clean and dry. After a
shower or a bath, nails are too soft to be
worked on.
6.4 Filing the nail edges
(Attachment 1)
• In order to file the nail edges, use attach-
ment 1 (8).
• Move the file along the edges of the nails.
Always work in one direction until the desired
shape and length has been reached.
6.5 Smoothing the nail surfaces
(Attachment 2)
WARNING risk of injury!
Buff the nail surface at most every 2 weeks. Do
not buff one nail for more than 15 seconds.
• For buffing minor irregularities on the nail sur-
face, use attachment 2 (8).
• Move attachment 2 (8) over the nail surface in
small circles without applying pressure.
• Afterwards, wipe the dust, which developed,
off the nail using a damp cloth.
25
GB