How To Use; Unpacking; Power Supply - Silvercrest SNPS 1.5 A1 Bedienungsanleitung

5.

How to use

5.1 Unpacking

• Remove all packing material.
• Check that the delivery is complete.

5.2 Power supply

WARNING! Risk of material damage!
Be sure to observe the correct polarity when in-
serting the battery. Please observe the illustra-
tions on the fold-out page.
1. Make sure that the slide switch 3 is set to 0.
2. Turn the bottom of the device 5 anticlockwise to
the lock symbol open
the device.
3. If necessary, remove the old battery from the
battery compartment.
4. Insert one battery (Type LR6 AA, 1.5 V).
5. Replace the bottom of the device 5 and turn it
clockwise to the lock symbol closed
6 and remove it from
7.
23
GB