Transferring Measurements - Beurer BM 54 Gebrauchsanweisung

• To clear the relevant user memory, you must first select
a user memory.
• Start the retrieval of the average measured values. A
flashes on the display and the average value of all saved
measured values in this user memory is displayed.
• Press and hold the memory button M1 or M2 for 5 se-
conds depending on the user memory you are in.
All the values in the current user memory are
deleted.
• To clear individual measurements from the relevant user
memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory button M1 or M2 for 5 se-
conds (depending on the user memory you are in).
• The selected value is deleted. The device briefly displays
CL 00.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP button.

7.6 Transferring measurements

Transfer via Bluetooth® low energy technology
It is also possible to transfer the measured values saved on the
device to your smartphone using Bluetooth
nology.
You will need the "beurer HealthManager" app for this. The app
is available free of charge on the Apple App Store and from Goo-
gle Play.
Proceed as follows to transfer values:
If Bluetooth is activated in the settings menu, the data is trans-
®
ferred automatically after the measurement. The
pears in the top left of the display (see chapter "7.3 Taking a blood
pressure measurement").
When connecting for the first time, a randomly generated six-
digit PIN code is displayed on the device, and at the same
time an input field appears on the smartphone in which you
must enter this six-digit PIN code. After successfully entering
the code, the device will be connected to your smartphone
32
low energy tech-
®
symbol ap-