List Of Lubricants; Proven Lubricants - Lincoln Quicklub series Benutzerinformation

User Manual
Operating Instructions
IMPORTANT
Absolute cleanness is essential when
handling lubricants. Impurities will remain
suspended in the lubricant and cannot
settle. This will result in damage to the
6001a02
lubrication system and thus to the bear-
ing.
The Quicklub pump can dispense commercial greases up to
NLGI grade 2 or mineral oils of at least 40 mm²/s (cST) at
operating temperature.
The proven lubricants (see following tables) have been
tested by us with regard to their transportability and bleeding
behavior. We can recommend them for an application up to
the indicated minimum delivery temperature in Quicklub
lubrication systems by Lincoln GmbH. During the tests these
lubricants did not cause any damage due to incompatibility
with the material used by us. The composition of the lubri-
cants, their behavior during the transport and their compatibil-
ity with other material are not known to us.
The lubricants we recommend on the basis of the manufac-
turer's data sheet (see following tables) can be used in our
lubrication systems up to the indicated minimum delivery
temperature.
IMPORTANT
Use lubricants with solid matter additives only after having consulted the manufacturer of the sys-
tem!
6001a02

Proven lubricants

Manufacturer
AGIP AUTOL
ARAL
AUTOL
AUTOL
BP
BOSCH-REXROTH
BOSCH-REXROTH
ELKALUB
FUCHS-LUBRITECH
FUCHS
FUCHS
FUCHS
FUCHS
MOBIL
MOLYKOTE
OPTIMOL
OPTIMOL
RHENUS
RHENUS
SHELL
SHELL
WESTFALEN
Page 24 of 26
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Lincoln List of Lubricants
Designation
Universal grease
Long-term grease H
Top 2000
Top 2000 W
C1 Multipurpose grease
Dynalub 510
Dynalub 520
GLS 135/N2
Stabil Eco EP2
Renocal FN 745
Renocal FN3
Renolit LZR 2 H
Renolit HLT 2
Mobilith SHC 100
TTF 52
Longtime PD 2
Olit CLS
Norlith KSP 2
Norlith MZN 2
Retinax EPL 2
Retinax CSZ
Gresalit ZSA 2
Lubricant recipes may change. In case of doubt, send your
request for more information to the manufacturer of the cen-
tralized lubrication system. This refers in particular to lubri-
cants with more than 3% graphite that are transportable in
lubrication systems only conditionally.
The lubricants released by us have not been tested with re-
gard to their long-term behavior.
IMPORTANT
The manufacturer of the centralized
lubrication system can accept no liability
for:
- damages due to the use of greases that
6001a02
are not or only conditionally transport-
able in centralized lubrication systems.
- damages on parts of the centralized
lubrication system caused by chemical
or biological changes of the lubricant
used.
- damages due to the incompatibility with
other materials.
The liability is limited to transportable
lubricants in centralized lubrication sys-
tems.
Thickener
Li-12-OH-stearat
Li-12-OH-stearat
Ca-complex
Ca-complex
Ca
Li
Li
Li
Li/Ca
Ca-12-OH-stearat
Ca
Li
Li
Li-complex
inorganic thickener
Li-12-OH-stearat
Li/Ca
Li + Li-12-OH stearat
Li
Li-12-OH-stearat
Li/Ca
Li-12-OH-stearat
2.2A-20003-B07
Min. delivery temperature
-15 °C
-15 °C
-10 °C
-20 °C
-20 °C
-15 °C
-20 °C
-15 °C
-25 °C
-25 °C
-20 °C
-20 °C
-25 °C
-25 °C
-30 °C
-20 °C
-15 °C
-15 °C
-15 °C
-10 °C
-35 °C
-15 °C