Manual Test; Controller Menu; Notification List - STIEBEL ELTRON STE Inbetriebnahme

COmmISSIONING

Controller menu

5.5

Manual test

Note
f Observe the chapter "Commissioning / Manual test f
of connected components" in the operating and in-
stallation instructions for the heat pump.
Note
A hand is displayed when the manual test is activated.
All settings carried out now do not lead to any parameter
changes at the heat pump.
5.5.1 Activate manual test
f Press the button on the start screen to open the main f
menu.
f Press the button. f
f Tap the button to access the "Manual test" menu. f
f Press the "Manual test" menu. f
ON
f Activate the function. f
f Select the required test in the submenu. f
5.5.2 End manual test
f Press the button on the start screen to open the main f
menu.
f Press the button. f
f Tap the button to access the "Manual test" menu. f
f Press the "Manual test" menu. f
OFF
f Deactivate the function. f
www.stiebel-eltron.com
6. Controller menu
Note
Some setting options are only available in safe mode.
Once you have entered the access code, it does not need
to be re-entered for eight hours. The remaining time is
displayed top left of the screen.
Note
Certain menu items are protected by a code. The facto-
ry-set code is 607080.
„ „

Notification list

„ „ Settings
… „ Language
… „ System settings
… „ SMART GRID
… „ Heat pump
… „ Heating
… „ DHW
… „ Dynamic allocation setting
… „ Booster heater
… „ Hot gas
… „ DHW draw-off control
… „ Water charging system
… „ Pool
… „ Mixing valves
… „ Cooling
… „ Cascade control
… „ Building management system (BMS)
… „ Buffer cylinder
… „ Alarm control/central alarm
… „ Circulation pumps
… „ Stage speed setting
… „ Energy management
… „ Modbus
… „
Manual test
… „ Communication analysis
„ „ Process data
… „ Operating data
… „ Operating time
… „ Version information
… „ Graphs
… „ Reason for stop
„ „ Operating mode
„Notification list „
In this view, you can see the last 100 active and acknowledged
error messages. The list is updated every minute and every time
the appliance is started.
STE | 33