Filling The Appliance With Cleaning Fluid; Examples Of Use - Silvercrest SUR 48 C4 Bedienungsanleitung

Filling the appliance with cleaning fluid
♦ Open the lid
♦ Fill the stainless steel bath
The parts to be cleaned must be covered with the cleaning fluid.
Do not exceed the maximum fill level MAX
the fluid.
NOTE
► Cold, clean tap water is generally best suited as cleaning fluid. The cleaning
effect can be enhanced by the addition of approximately 3 drops of washing-
up liquid. Do not use caustic cleaners, ammonia, bleach or heavily per-
fumed detergents.
► The cleaning performance is dependent on the amount of water: the more
water, the lower the cleaning performance.
♦ Place the objects to be cleaned in the ultrasonic cleaner. The item to be
cleaned only needs to be covered in water. Use the
♦ Now close the lid

Examples of use

Jewellery / metal items
CAUTION
WARNING of material damage!
► Do not clean any objects with scratched surfaces as existing scratches may
be made worse by an ultrasonic treatment.
► The appliance is not suitable for cleaning sensitive or porous stones such
as pearls, mother-of-pearl or coral, turquoise, opal, azurite, malachite, tiger's
eye and similar semi-precious stones. Ask the jeweller who sold you the
jewellery if it is suitable for cleaning with ultrasound and, if applicable,
cleaning additives.
► Screws and fittings that are not firmly attached may come loose during the
cleaning process. Clean such items no more than once a month and for
only for a short period (maximum 90 seconds).
► Do not clean mechanical watches in this appliance.
The accuracy may be adversely affected.
■ The appliance is suitable for the cleaning of gold/silver jewellery and jewellery
made of other metals, such as necklaces, rings, bracelets, as well as metal cutlery,
coins, medals, metallic components, etc.
■ 28 │ GB │ IE
6
.
7 with the cleaning fluid.
6
.
8
even after placing the item in
12
9 10 11
, , or
SUR 48 C4
inserts.