Operating Components; Handling And Operation; How Ultrasonic Cleaning Works; Filling The Appliance With Cleaning Fluid - Silvercrest SUR 46 C2 Bedienungsanleitung

Operating components

Display
ON button
2
3 SET button
4 OFF button
5 Operating LED
6 Lid
Stainless steel bath
7
MAX mark for maximum fill level
8
9 Basket insert for small items
10 Bracelet holder
11 Spacer ring
12
Spindle for a maximum of 2 CDs/DVDs

Handling and operation

This section provides you with important information on handling and using the
appliance.

How ultrasonic cleaning works

The ultrasonic field created in the cleaning fluid during operation generates rapidly
alternately waves with high and low pressure. These waves produce air bubbles
on the surface of the item being cleaned which quickly burst open again. This
process works mechanically on the surfaces of the item and thus loosens dirt and
other residues. It can, however, also deepen already existing scratches.
Filling the appliance with cleaning fluid
♦ Open the lid
♦ Fill the stainless steel bath
The parts to be cleaned must be covered with the cleaning fluid.
Do not exceed the MAX fill level
NOTE
► Cold, clean tap water is generally best suited as cleaning fluid. The cleaning
effect can be enhanced by the addition of approximately 3 drops of washing-
up liquid. Do not use caustic cleaners, ammonia, bleach or heavily per-
fumed detergents.
► The cleaning performance is dependent on the amount of water: the more
water, the lower the cleaning performance.
SUR 46 C2
.
6
with the cleaning fluid.
7
even after placing the item in the fluid.
8
GB
9