Operating Components; Handling And Operation; How Ultrasonic Cleaning Works; Filling The Appliance With Cleaning Fluid - Silvercrest SUR 46 C2 Bedienungsanleitung

Operating components

Display
ON button
2
3 SET button
4 OFF button
5 Operating LED
6 Lid
Stainless steel bath
7
MAX mark for maximum fill level
8
9 Basket insert for small items
Bracelet holder
10
11 Spacer ring
12 Spindle for a maximum of 2 CDs/DVDs

Handling and operation

This section provides you with important information on handling and using the
appliance .

How ultrasonic cleaning works

The ultrasonic field created in the cleaning fluid during operation generates rapidly
alternately waves with high and low pressure . These waves produce air bubbles
on the surface of the item being cleaned which quickly burst open again . This
process works mechanically on the surfaces of the item and thus loosens dirt and
other residues . It can, however, also deepen already existing scratches .

Filling the appliance with cleaning fluid

♦ Open the lid
♦ Fill the stainless steel bath
The parts to be cleaned must be covered with the cleaning fluid .
Do not exceed the MAX fill level
NOTE
► Cold, clean tap water is generally best suited as cleaning fluid . The cleaning
effect can be enhanced by the addition of approximately 3 drops of washing-
up liquid . Do not use caustic cleaners, ammonia, bleach or heavily per-
fumed detergents .
► The cleaning performance is dependent on the amount of water: the more
water, the lower the cleaning performance .
SUR 46 C2
.
6
with the cleaning fluid .
7
even after placing the item in the fluid .
8
GB
27