Hioki IM7580A-2 Bedienungsanleitung Seite 264

Speichern von Daten auf einem USB-Speichergerät
(3) Messparameter
[PARA]
Der Messparameter „θ" wird als „PHASE" angezeigt.
1
Bei ON
"HIOKI E.E. CORPORATION","IM7585","Ver. 1.00"
"Serial No. 123456789"
"DATE","15-05-08"
"TIME","15:17:10"
"TRIG","EXT"
"TRIG DELAY","0.00000","s"
"SYNC","OFF",""
"TRIG SYNC WAIT","0.00100","s"
"TRIG SYNC INDEX WAIT","0.00000","s"
"FREQ"," 1.0000E+06","Hz"
"POWER","0.0","dBm"
"SPEED","MED",""
"AVG","001",""
"RDC","OFF"
"WAVE","0001"
"DC WAIT","0.00000","s"
"AC WAIT","0.00000","s"
"SCALING","OFF"
"Z[ohm]","OFF","PHASE[deg]","OFF"
"5.98718E+00","","175.604",""
256
1
Wählen Sie Aufzeichnung oder keine Aufzeichnung
für den Messparameter in einer Textdatei.
[OFF]
[ON]
2
Drücken Sie
2
Einstellungsbildschirms.
Bei OFF
"HIOKI E.E. CORPORATION","IM7585","Ver. 1.00"
"Serial No. 123456789"
"DATE","15-05-08"
"TIME","15:17:10"
"TRIG","EXT"
"TRIG DELAY","0.00000","s"
"SYNC","OFF",""
"TRIG SYNC WAIT","0.00100","s"
"TRIG SYNC INDEX WAIT","0.00000","s"
"FREQ"," 1.0000E+06","Hz"
"POWER","0.0","dBm"
"SPEED","MED",""
"AVG","001",""
"RDC","OFF"
"WAVE","0001"
"DC WAIT","0.00000","s"
"AC WAIT","0.00000","s"
"SCALING","OFF"
"5.98718E+00","","175.604",""
Der Messparameter wird nicht aufgezeichnet.
Der Messparameter wird aufgezeichnet.
zum Schließen des
[EXIT]