Dmx Operation - EuroLite LED KLS-170 Bedienungsanleitung

DMX operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 25 control channels.
However, it can also be switched to a mode with 3, 6 or 16 channels if different functions are required. To be
able to operate the device with a DMX controller, the DMX starting address must be set for the first DMX
channel. The starting address depends upon which DMX controller is being used. Please refer to the
controller's documentation.
1 Press the button MENU so many times until dПH is indicated in the display. Confirm with the ENTER
button. The display indicates the DMX start address.
2 Confirm with ENTER. The display indicates 3CH (3 DMX channels), 6CH (6 DMX channels), 16CH (16
DMX channels) or 25CH (25 DMX channels). Use the ▲ and ▼ buttons to select the desired number of
DMX channels.
3 Confirm with ENTER. Now the display indicates the menu item for the DMX start address d***. Confirm
with ENTER, then use ▲ and ▼ to set the address.
4 Confirm ENTER. A dot will flash when DMX signals are being received. If no control signals are
available, the DMX address set will be flashing.
Note
Please make sure you do not have any overlapping channels in order to control each device correctly and
independently from any other fixture in the DMX chain. If several devices are addressed similarly, they work
synchronically.
Functions in DMX mode
3-channel mode
Channel Value
Blackout, automatic mode and sound-controlled mode
000‒009
010‒050
051‒090
1
091‒130
131‒170
171‒210
211‒255
Program selection for automatic mode and sound-controlled mode
000‒255
000‒255
2 000‒255
000‒255
000‒255
000‒255
Automatic mode spots
Channel 1: 010‒050
000‒014 AP01 show program 1
015‒029 AP02 show program 2
030‒044 AP03 show program 3
045‒059 AP04 show program 4
060‒074 AP05 show program 5
075‒089 AP06 show program 6
090‒104 AP07 show program 7
105‒119 AP08 show program 8
120‒134 AP09 show program 9
135‒149 AP10 show program 10
150‒164 AP11 show program 11
165‒179 AP12 show program 12
180‒194 AP13 show program 13
195‒209 AP14 show program 14
210‒224 AP15 show program 15
225‒239 AP16 show program 16
240‒255 AP17 show program 17
Blackout
Automatic mode spots
Automatic mode strobe LEDs
Automatic mode spots and strobe LEDs
Sound control spots
Sound control strobe LEDs
Sound control spots and strobe LEDs
Automatic mode spots
Automatic mode strobe LEDs
Automatic mode spots and strobe LEDs
Sound control spots
Sound control strobe LEDs
Sound control spots and strobe LEDs
Automatic mode strobe LEDs
Channel 1: 051‒090
000‒024
025‒049
050‒074
075‒099
100‒124
125‒149
150‒174
175‒199
200‒224
225‒249
250‒255
Function
AF01 show program 1
AF02 show program 2
AF03 show program 3
AF04 show program 4
AF05 show program 5
AF06 show program 6
AF07 show program 7
AF08 show program 8
AF09 show program 9
AF10 show program 10
AF11 show program 11
27/32
Automatic mode spots, strobe LEDs
Channel 1: 091‒130
000‒099 AM01 show program 1
100‒199 AM02 show program 2
200‒255 AM03 show program 3
00121009, Version 1.1