Installation; Mounting On A Stand; Overhead Rigging - EuroLite LED KLS-170 Bedienungsanleitung

INSTALLATION

Mounting on a stand

For mobile use place the light set on a lighting stand via the stand sleeve and fasten the fixation screw.
Suitable stands can be found in chapter Accessories.
Notes:
• Please make sure the load is installed in a balanced way and the carrying capacity of the stand is not
exceeded.
• Install the stand on a plane area (inclination angle max. 5°) and out of the reach of people.
• Depending upon the individual installation spot, all necessary measures against movement and for
securing the standing safety have to be created (also in case of fire).

Overhead rigging

WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure
that the device is installed securely and cannot fall down. The installation must be carried out by
a specialist who is familiar with the hazards and the relevant regulations.
Truss
mounting clamp
Fixation screws
Safety bond
21/32
Truss
mounting clamp
00121009, Version 1.1