Cleaning And Maintenance; Replacing The Fuse - EuroLite LED KLS-170 Bedienungsanleitung

25-channel mode
Channel Value
Spot/strobe LED 1
1 000‒255
2 000‒255
3 000‒255
4 000‒255
5
000‒255
Spot/strobe LED 2
6 000‒255
7 000‒255
8 000‒255
9 000‒255
10
000‒255
Spot/strobe LED 3
11 000‒255
12 000‒255
13 000‒255
14 000‒255
15
000‒255
Spot/strobe LED 4
16 000‒255
17 000‒255
18 000‒255
19 000‒255
20
000‒255
Strobe LEDs
000-127
21
128-255
22 000‒249
250‒255

CLEANING AND MAINTENANCE

The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1 Disconnect the device from power and allow it to cool.
2 Open the fuse holder of the mains connection with a fitting screwdriver.
3 Remove the old fuse from the fuse holder and replace it with a new fuse.
4 Carefully push the fuse holder back into its position before reapplying power.
Brightness green 0-100 %
Brightness blue 0-100 %
Master dimmer 0-100 %
Brightness red 0-100 %
Strobe effect slow fast
Brightness green 0-100 %
Brightness blue 0-100 %
Master dimmer 0-100 %
Brightness red 0-100 %
Strobe effect slow fast
Brightness green 0-100 %
Brightness blue 0-100 %
Master dimmer 0-100 %
Brightness red 0-100 %
Strobe effect slow fast
Brightness green 0-100 %
Brightness blue 0-100 %
Master dimmer 0-100 %
Brightness red 0-100 %
Strobe effect slow fast
White LEDs on
UV LEDs on
Strobe effect white/UV LED 1 slow
White/UV LED 1 on
Function
fast
29/32
00121009, Version 1.1