Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX-controlled operation
You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.
Addressing
The Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the LED PAR-64 RGBAW 49x3W Short will respond to the controller.
If you set, for example, the address to channel 8, the LED PAR-64 RGBAW 49x3W Short will use the
channel 8 to 14 for control.
Please, be sure that you don't have any overlapping channels in order to control each LED PAR-64 RGBAW
49x3W Short correctly and independently from any other fixture on the DMX-chain.
If several LED PAR-64 RGBAW 49x3W Short are addressed similarly, they will work synchronically.
Press the Menu-buttons and the Up/Down-buttons for setting the desired starting address. Now you can start
operating the LED PAR-64 RGBAW 49x3W Short via your lighting controller.
Note:
It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.
DMX-protocol
Channel:
Value:
1
000 – 255
Channel:
Value:
2
000 – 255
Channel:
Value:
3
000 – 255
Channel:
Value:
4
000 – 255
Channel:
Value:
5
000 – 255
Channel:
Value:
6
000 – 255
Channel:
Value:
000 – 000
001 – 005
7
006 – 010
011 – 255
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
White (0 – 100%)
Function:
Amber (0 – 100%)
Function:
Dimmer (0 – 100%)
Function:
No function
Sound Control (30 colors)
No function
Strobe (increasing)
21/22
00061815.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
