Remote Control With The Foot Pedal Fp-2; Operation Via Dmx Controller; Setting The Dmx Starting Address And The Number Of Dmx Channels - EuroLite LED KLS-10 COMPACT LIGHT SET Bedienungsanleitung

7.3 Remote control with the foot pedal FP-2

The foot pedal available as accessory allows convenient control of the light set. Short actuation and long
actuation of the pedals activates different functions. After switching off and on again, the operating mode
selected last is activated.
1
Pedal 1 PRESETS – Spot 1-4, automatic mode and fade
• Repeated short actuation: for the following functions
Number
1
2
3
4
5
6
7
• Long actuation: fade function 1-5
2
Pedal 2 BLACKOUT – Blackout
• Short actuation: immediately switches the LEDs off and on
• Long actuation: slowly (2 seconds) switches the LEDs off and on
3
Pedal 1 PRESETS + Pedal 2 BLACKOUT – Sound control and chaser
• Short actuation: to select sound control
• Long actuation: to select the chaser (speed 0.5 s)
Chaser
Step 1
Step 2
Step 3
Step 4

7.4 Operation via DMX controller

For operation with a controller with DMX512 protocol, the light set is equipped with 8 control channels.
However, it can also be switched to a mode with 2, 3, 4, 5 or 7 channels if different functions are required.

Setting the DMX starting address and the number of DMX channels

1
Adjust the number of DMX channels which are to be used for controlling the unit. For this press the
button MENU so many times until the desired value is indicated in the display. Then press ENTER to
confirm your setting.
2
To be able to operate the light set with a DMX controller, the DMX starting address must be set for the
first DMX channel. Use the buttons [▲] und [▼] to set the address and confirm your setting with
ENTER. As soon as the light sets receives DMX control signals, the red DMX indicator lights up in the
display and the set can be operated with the DMX controller.
Note: The starting address depends upon which DMX controller is being used. Please refer to the controller's
documentation.
Function
All spots on
Spot 1 on
Spot 2 on
Spot 3 on
Spot 4 on
Automatic mode
Fade
Spot 1 Spot 2
5 % 100 %
100 % 5 %
100 % 100 %
100 % 100 %
33/40
Spot 3 Spot 4
100 % 100 %
100 % 100 %
5 % 100 %
100 % 5 %
00082778.DOCX, Version 1.0