Serial Interface Rs232 - LR-Cal PYROS 140-2L Bedienungsanleitung

The LED of the switch test func on will flash to indicate that the process is ac ve.
The thermostat's release values are recorded in the paramters
procedure explained in appendix A (A.3).
The temperature runs between T.max. and T.min. un l the func on is switched off.
values are con nously updated during every run.
To stop the switch test, enter „run" = OFF.

6.7.2 Serial interface RS232

On the front of the instrument, there is a 9 pole socket (11) connected to the thermo-regulator,
which enables the temperature calibrator to be completely controlled via a PC by the RS232
interface.
The external PC / Laptop must be conform to the IEC950 standard.
!
The serial RS232 cable must be wired als follows:
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt •
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
PYROS Temperaturkalibratoren
PYROS Dry Block Temperature Calibrators
DT -Info@Leitenberger.de •
43
SOn and SOFF . Refer to the
GERMANY
www. LR -Cal.net • www.druck-temperatur.de
MANUAL
SOn and SOFF