Descrip On Of The Instrument; Thermoregulator - LR-Cal PYROS 140-2L Bedienungsanleitung

PYROS Temperaturkalibratoren
MANUAL
PYROS Dry Block Temperature Calibrators
2. Displace the fuse out of the clamp
4. Insert the clamp into the fuse container. 5. Press in fully the fuse container.
Select an insert with the correct diameter, see chapter 4.

6.5 Descrip on of the instrument

6.5.1 Thermoregulator

The thermo-regulator (6) is a PID microprocessor, which can be set to temperature values
depending on the model:
Cal
• LR- PYROS 140-2L
• LR-Cal PYROS 375 : 0...375°C
• LR-Cal PYROS 650 : 0...650°C
The display indicates the temperature measured inside the block (via the built-in reference
sensor), the selected set point and the se ng parameters.
▲ ▼
The keys and are used to increment and decrement any numerical parameter. The increment
resp. decrement speed is propor onal to the me the key remains depressed.
The key allows access to the various parameters of the menu levels. F
The key (enter) confirms inputs of e.g. set point or parameter values. E
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
Cal
and LR- PYROS 140-1L
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt •
3. Place new fuse into the clamp (fuse container)
: -30...+140°C
DT -Info@Leitenberger.de •
38
www. LR -Cal.net • www.druck-temperatur.de
GERMANY