Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Operation, Scope of Supply,
Accessories
Notes, read carefully!
This manual is intended for the machine operator.
Keep it in a safe place!
The guillotines may only be operated:
In a technically safe condition, for its intended
use and in accordance with the applicable safety
and accident prevention regulations
With all the safety devices attached
In accordance with the safety precautions
When the operating personnel has read and
understood this manual, in particular Chapter 2
"Safety precautions" (p. 16) and Chapter 3
"Commissioning and operational safety" (p. 16)
Only in this way can incorrect operation be avoided
and hazard situations correctly assessed.
Never reach into the cutting area
of the guillotine to avoid the risk
of cutting off limbs!
Wear eye protection or safety
goggles when working with the
guillotine!
1.1 Symbols in this Manual
Hazard symbol:
The greatest care and attention must
be taken here. Lack of attention can
result in an immediate risk of injury for
the operating personnel or third par-
ties. Furthermore, the machine may
be damaged.
Information symbol:
Texts marked with this symbol con-
tain important information and useful
tips.
Schmid & Wezel
D 75433 Maulbronn
1.2 Intended Use
The guillotines serve for cutting off horns.
The guillotine is suitable for use in medium-sized
and large slaughterhouses.
The machines are not equipped for any other form
of use. Should the operator wish to use the guillo-
tine in some other way, please consult Schmid &
Wezel GmbH & Co. (S&W) beforehand.
Use in any other way may result in a risk of acci-
dents and increased wear to the guillotine. The user
alone bears the liability for the consequences of any
other form of use.
1.2.1 Residual risks
During industrial use of the guillotines on animal
carcasses there is a risk of injuring yourself or, in the
case of gross negligence, of killing someone. Since
during the intended use, the size of the opening be-
tween the guillotine knives cannot be reduced,
there is a risk of the neck or upper arm or even the
shoulder joint coming between the guillotine knives
and the guillotine then being closed. Improper use
of the guillotine could thus lead to instant death or
to death by bleeding. . Be sure therefore to always
use the machine in the proper manner.
The guillotine requires a hydraulic power pack to
generate the cutting force, for 2-hand operation
also a pneumatic control unit.
The machine itself cannot build up any pressure.
The pressure is only built up in conjunction with the
upline pressure generator and the corresponding
hoses. The machine may only be put into operation
when all the requirements of the Pressure Vessel Di-
rective applicable to this product have been ob-
served.
The machine is designed for a pressure of 200 bar.
⋅
p V 240
A value of
pressure volume in the guillotines and in the pres-
sure generator and hoses. The Pressure Vessel Di-
rective 97/23/EC with the corresponding diagrams
generally applies to these elements. In view of the
sturdy design with respect to strength, torsional ri-
gidity and stability under static and dynamic operat-
ing loads, however, we would refer you to Article
1.3.10 of the Pressure Vessel Directive 97/23/EC:
As the pressure constitutes no significant factor for
the design, the guillotines are not subject to the pro-
visions of the above Directive.
Seite/ Page
15/ 33
>
can be assumed for the
Ausführung/ Version
04.2012
Werbung
Inhaltsverzeichnis
