Herunterladen Inhalt Inhalt Diese Seite drucken

Hazards In The Workplace; Hazards Caused By Dust And Vapours; Hazards Caused By Noise - Parkside PDRS 27 A1 Originalbetriebsanleitung

Druckluft-ratschenset
Vorschau ausblenden Andere Handbücher für PDRS 27 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4

Hazards in the workplace

Slipping, tripping up and falling are the main
causes of injuries in the workplace . Pay atten-
tion to surfaces that may have become slippery
from the use of the machine and also be aware
of tripping hazards caused by air or hydraulic
hoses .
Proceed with caution in unknown surroundings .
Hidden hazards caused by power or other
supply lines may be present .
This compressed air tool is not suitable for use
in explosive atmospheres and is not insulated
against contact with power sources .
Ensure that there are no electric cables, gas
pipes, etc . that might result in a hazard if dam-
aged by using the machine .

Hazards caused by dust and vapours

The dusts and vapours produced by using auto-
matic screwdrivers can be hazardous to health
(e .g . cause cancer, birth defects, asthma and/
or dermatitis); it is essential to carry out a risk
assessment in respect of these risks and to im-
plement corresponding regulatory mechanisms .
The risk assessment should include the dust
caused by using the machine and any existing
dust that may be raised at the same time .
The exhaust air should be extracted so that the
minimum amount of dust is raised in an already
dusty environment .
If dusts or vapours are created, the main priority
must be to control these at the site of their
release .
PDRS 27 A1
All machine components or accessories in-
tended for collecting, extracting or suppressing
airborne dust or vapours or should be used and
serviced properly in accordance with the manu-
facturer's instructions .
Use a dust mask as per the instructions provided
by your employer or as required by health and
safety regulations .

Hazards caused by noise

Excessive noise levels in conjunction with insuffi-
cient hearing protection may lead to permanent
hearing damage, loss of hearing and other
problems, such as tinnitus (ringing, buzzing,
whistling or humming in your ears) . It is essential
to carry out a risk assessment with regard to
these hazards and implement suitable control
mechanisms .
Suitable control mechanisms include measures
such as the use of insulating materials to avoid
ringing noises from occurring on the work-
pieces .
Use hearing protection according to the instruc-
tions provided by your employer and as re-
quired by work and health safety regulations .
The automatic screwdriver is to be operated
and maintained in accordance with the recom-
mendations contained in this manual in order to
reduce any unnecessary increase of the noise
levels .
If the automatic screwdriver is equipped with
a sound absorber, it must always be available
and in good working order when using the
automatic screwdriver .
Consumables and the machine tool should
be selected, maintained and replaced in ac-
cordance with the recommendations in these
instructions in order to avoid any unnecessary
increase of the noise levels .
GB │ IE
 25

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis