■
The hose must be designed for min . 6 .3 bar
or 125 psi, at least for 150% of the maximum
pressure generated in the system .
■
The tool and the supply hose must be fitted with
a hose coupling that allows the pressure of
the coupling hose to be dispersed completely
during disconnection .
■
DANGER! Avoid contact with an energised line!
This tool is not insulated against electric shock .
WARNING – RISK OF INJURY!
►
Under certain circumstances, high working
pressures can cause kickback to occur . This
can cause hazards due to the continuous
loading .
■
If you are inexperienced with the appliance,
seek training in how to use it safely .
WARNING – RISK OF INJURY!
►
RISK OF PUNCTURE WOUNDS! Do not
treat an injection wound as a simple cut .
A high-pressure jet can inject toxins into the
body and cause serious injuries . In the event
of an injection into the skin, seek medical
assistance immediately .
■
The compressed air tool must not be modified in
any way without the manufacturer's approval .
■
Use the compressed air tool only with the speci-
fied pressure (6 .3 bar) .
■
The compressed air tool must always be discon-
nected from the air supply after use and for as
long as it is not in use .
■
The compressed air tool must not be used if it is
not airtight or if it requires repair .
■
Never connect the compressed air tool with a
compressed air hose that exceeds a pressure
of 6 .3 bar .
■
22
│
GB │ IE
■
Keep work area clean and well lit . Cluttered or
dark areas invite accidents . This enables better
control of the tool in unexpected situations .
WARNING!
►
Have your power tool serviced by qualified
trained personnel using only original spare
parts . This ensures that the safety of the tool
is maintained .
■
Keep children and other persons away from the
tool during operation . Distractions can cause
you to lose control .
■
Dress properly . Do not wear loose clothing or
jewellery . Keep your hair, clothing and gloves
away from moving parts . Loose clothes, jewel-
lery or long hair can be caught in moving parts .
■
Put the trigger and the tool away in the case of
an unexpected stoppage of the compressor .
■
Wherever possible, use a condensate separator
or drain the condensate (water) from the hoses
and tubing regularly before and during the use
of the compressed air tools .
■
NOTICE! An undersized compressed air system
will reduce the efficiency of your tool .
■
Please ensure that you have read and under-
stood the safety instructions regarding multiple
hazards before installation, operation, repair,
service and replacement of any accessories
and before work near the automatic screwdriv-
er . Otherwise, there is a risk of serious physical
injuries .
■
The automatic screwdriver should only be fitted,
adjusted or used by qualified and trained
operators .
PDRS 27 A1