Herunterladen Inhalt Inhalt Diese Seite drucken

Bit Selection From The Bit Changeable Drum; Bit Change In The Bit Changeable Drum; Use Extension Bit Holder; Cleaning And Maintenance - Parkside RAPIDFIRE 2.0 Originalbetriebsanleitung

Akku-wechselbitschrauber
Vorschau ausblenden Andere Handbücher für RAPIDFIRE 2.0:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 56
GB
MT
Bit selection from the bit
changeable drum
1. Push the slide of the interchange-
able cordless screwdriver (4)
forward.
2. Turn the bit changeable drum
(14) to the left or right until the
desired bit is located on top and
is in line with the bit holder (3).
The bit changeable drum en-
gages audibly.
3. Push the slide of the interchange-
able cordless screwdriver (4) to
the back.
Only grab the side of the
slide of the interchangeable
cordless screwdriver.
Caution, risk of injury caused
by pinching!
The selected bit is automatically fixed in
the bit holder (
3).
Bit change in the bit
changeable drum
Remove the bit (
bit holder (
3).
Insert a suitable 6-point bit in the bit holder
(
3). Because of the 6-point bit holder, it
may be that you need to rotate the bit slight-
ly. Slide the bit right into the bit holder
(
3). The bit is held firmly by the duct and
the magnetic holder.

Use extension bit holder

Remove the current bit (
holder (
3).
52
2) from the
2) from the bit
Insert the extension bit holder (
bit holder (
3). It may be that you need to
rotate the extension bit holder (
because of the 6-point bit holder. Com-
pletely insert the extension bit holder (
into the bit holder (
holder (
12) is held firmly by the duct and
the magnetic holder.
To remove the extension bit holder (
simply remove the extension bit holder from
the bit holder (
3).
Cleaning and

maintenance

Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
Maintenance
The appliance is maintenance free.
12) into the
12) slightly
3). The extension bit
12),
12)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis