Use Only As Authorized - Scheppach HS730 Bedienungsanleitung

• Unless otherwise stated in the operating instruc-
tions, damaged safety devices and parts must
be repaired or replaced by an authorized service
center.
• Have damaged switches replaced by a customer
service workshop.
• This electric tool complies with the pertinent safety
regulations. Repairs are to be carried out only by a
qualified electrician using original replacement parts
or the user may suffer an accident.
• If necessary, wear suitable personal protection
equipment. This could consist of:
• Ear plugs to prevent the risk of damaging your hear-
ing;
• A breathing mask to avoid the risk of inhaling haz-
ardous dust.
• Always wear gloves when handling saw blades and
rough materials. Whenever practicable, saw blades
must be carried in a container.
• The operator must be informed about the conditions
that influence the generation of noise (for example
saw blades designed to reduce noise emissions,
caring for blades and the machine).
• Faults on the machine or its guards, safety devices
and blade must be reported to the person in charge
as soon as they are discovered.
• Use only the transport devices to move the ma-
chine. Never use the guards for handling and mov-
ing the machine.
• All operators must receive proper training in the
use, adjustment and operation of the machine.
• Do not saw any materials that contain foreign bod-
ies such as wires, cables or ties.
• Only use sharp saw blades
• The machine must stand during the operation on a
horizontal , flat floor and the floor around the ma-
chine must be level, well maintained and free of
debris, such as Be chips and cut workpieces.
• Adequate general lighting or local lighting must be
available.
• Assign the workpiece to be machined and the stack
finished workpieces close to the normal work of
the operator.
• Make it adopt the safe procedures for cleaning,
maintenance and the regular removal of chips and
dust to avoid the risk of fire .
• Follow the instructions of the manufacturer for use
, adjustment and repair of saw blades.
• Note appearing on the blades maximum speed.
• Make sure that the flanges used are as specified by
the manufacturer , suitable for the intended use .
• Make sure you include that necessary for operat-
ing the machine guards and other safety devices
are fitted, they are in good operating condition and
properly maintained .
• The dust level is influenced by the type of material
to be cut
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Warning! This electric tool generates an electromag-
netic field during operation. This field can impair ac-
tive or passive medical implants under certain condi-
tions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
electric tool.
m Use only as authorized
The machine corresponds to the valid EC guide-
line.
• The log saw is constructed as 1-man-operating
stand and is only to be used in outdoor locations.
• The log saw is a portable circular saw. It is only ap-
plicable to cross cut firewood with a feeding rocker
according to the technical specifications.
• The saw is constructed solely for cross cutting of
firewood.
• Regardless of the diameter of the wood only 1 work
piece is to be put on the rocker.
• Observe all safety and hazard notes on the machine
and ensure they are kept complete and in a legible
condition.
• The machining range and surrounding areas of the
machine must be clear of interfering foreign matter
to prevent accidents occurring.
• Workpieces must be completely free of foreign ob-
jects, i.e. nails or screws.
• The circular sawbench is designed exclusively for
the machining of wood and materials similar to
wood. Only original Scheppach tools and acces-
sories may be used. Use the required sawblade in
accordance with the EN 847-1 norm depending on
the type of cut and type of wood (solid wood, ply-
wood or chipboard). Please observe the „Special
Tool Accessories".
• The machine must only be used in technically per-
fect condition in accordance with its designated use
and the instructions set out in the operating manual,
and only by safety-conscious persons who are fully
aware of the risks involved in operating the machine.
Any functional disorders, especially those affecting
the safety of the machine, should therefore be recti-
fied immediately.
• Relevant accident prevention regulations and other,
generally recognized safety-technical rules must
also be adhered to.
• The Scheppach machine may only be used, main-
tained, and operated by persons familiar with it and
instructed in its operation and procedures. Arbitrary
alterations to the machine release the manufacturer
from all responsibility for any resulting damages.
• The Scheppach machine may only be used with
original accessories and original tools made by the
manufacturer.
• Any other use exceeds authorization. The manufac-
turer is not responsible for any damages resulting
from unauthorized use; risk is the sole responsibility
of the operator.Remaining hazards.
19 I 60