Possible Movements Of The Treatment Light - Ultradent Solaris 2 Gebrauchsanweisung

4 | INSTRUCTIONS FOR USE
4.2 Possible movements of the treatment light
16 of 21
CAUTION
Each time the treatment light is switched on, it is operated with the illuminance it
had when it was last switched off.
Action Procedure
Switching Move the control lever briefly to the left (1) to switch on the treat­
on ment light.
Note: After actuating, let go of the control lever.
Switching Move the control lever briefly to the right (2) again to switch off the
off treatment light.
Note: After actuating, let go of the control lever.
Dimming to Move the control lever to the left (1) and keep it pressed until the de­
minimum sired illuminance is reached.
Note: When the minimum illuminance is reached, an audible signal
sounds.
Dimming to Move the control lever to the right (2) and keep it pressed to in­
maximum crease the illuminance until the desired intensity is reached.
Note: When the maximum illuminance is reached, an audible signal
sounds.
Polymerisa­ Move the control lever to the front or to the back (3) in order to
tion setting switch directly to the minimum illuminance (polymerisation setting).
Notes:
▪ After actuating, let go of the control lever.
▪ Moving the control lever to the front or to the back again causes
the previously saved illuminance to be set.
NOTE
All movements of the treatment light must be carried out using one of the two
handles.
CAUTION
Do not move the treatment light or the light head using the control lever.
Do not move the treatment light or the light head beyond the limits specified below.
GB Solaris 2 Treatment Light