2.1
Activating application packages
Measuring device approval
Without approval
With approval (e.g. IECEx)
For custody transfer
1)
1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,
3 = Endress+Hauser (return measuring device to manufacturer)
4 = Check with local approval center if installation/modification must be performed under supervision.
3
Personnel authorized to fit new nameplates
Measuring device approval
Without approval
With approval (e.g. IECEx)
* Note: Some countries/markets require a field inspection in order to change
nameplates. Please act in accordance with national legislation.
4
Checking the configuration of the modification kit
supplied
Modification kits and Installation Instructions are used to upgrade certain functions of
an Endress+Hauser measuring device. Only original parts from Endress+Hauser may be
used. Only modification kits designed by Endress+Hauser for the measuring device can
be used at any time. The configuration of the supplied modification kit can be checked
via W@M Device Viewer.
Endress+Hauser
Personnel authorized to carry out modification
1, 2, 3
1, 2, 3
Personnel authorized to fit new nameplates
2, 3
2, 3*
EA01249D
4
1)
5