Herunterladen Inhalt Inhalt Diese Seite drucken

Entering The Software License Code: Via Fieldcare - Endress+Hauser Promag 100 Einbauanleitung

Activating application packages
Vorschau ausblenden Andere Handbücher für Promag 100:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EA01249D
10

Entering the software license code: via FieldCare

10.1
Promag, Promass, Prosonic Flow 100, Promag 400
Promag, Promass, Prosonic Flow 100 for all communication protocols excluding MODBUS
Open FieldCare:
1. Open the connection wizard
2. Open the communication protocol, select "Service"
3. Select the communication DTM, open "CDI Communication TCP/IP"
4. Check the interface settings (IP address)
5. Open the "Expert" directory
6. Navigation:
• Open the "Expert" directory
• Open the "System" directory
• Open the "Administration" directory
• In the "Activate SW option" subdirectory, enter the SW license code (appl. package code) and
press Enter to confirm
7. Check the activated software option(s) that are displayed in the "Software option overview"
subdirectory
Activate the device either using the factory code "0000" or the entry code defined by the
customer (
do not enter the service code). Ask the customer if you do not know the
entry code. The new code can only be entered in the "Maintenance" user role.
10.2
Promag, Promass 100, Promag, Promass, Prosonic Flow 200,
Prowirl 200
Promag, Promass 100 for MODBUS
Open FieldCare:
1. Open the connection wizard
2. Open the communication protocol, select "Service"
3. Select the communication DTM, CDI Communication FXA 291
4. Check the interface setting (baud rate)
5. Open the "Expert" directory
6. Navigation:
• Open the "Expert" directory
• Open the "System" directory
• Open the "Administration" directory
• In the "Activate SW option" subdirectory, enter the SW license code (appl. package code) and
press Enter to confirm
14
Endress+Hauser

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis