Personnel Authorized To Carry Out Conversion; Safety Instructions - Endress+Hauser Promag 300 Einbauanleitung

Order structure
Conversion kits for Promag, Promass 500-digital
DKZ002–****FGA***
DKZ002–AA**FGA***+P8
DKZ002–GR**FGA***+P8
DKZ002–AABAFHA***+P8
DKZ002–GRBAFHA***+P8
2

Personnel authorized to carry out conversion

Authorization to carry out a conversion depends on the measuring device' s approval type. The
table below shows the authorized group of people in each case.
Measuring device approval
Without approval
With approval (e.g. IECEx)
For custody transfer
1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,
3 = Endress+Hauser (return measuring device to manufacturer)
4 = Check with local approval center if installation/modification must be performed under supervision.
3

Safety instructions

• Only use original parts from Endress+Hauser.
• Comply with national regulations governing mounting, electrical installation,
commissioning, maintenance and conversion procedures.
• The specialized technical staff involved in the mounting, electrical installation,
commissioning, maintenance and conversion of the measuring devices must meet the
following requirements:
– Specialized technical staff must be trained in instrument safety.
– They must be familiar with the individual operating conditions of the devices.
– In the case of Ex-certified measuring devices, they must also be trained in explosion
protection.
Endress+Hauser
Expansion
Promag, Promass 500 digital transmitter
with display to Promag, Promass 500
digital transmitter with display and
WLAN interface
Promag, Promass 500 digital transmitter
with display to Promag, Promass 500
digital transmitter with display and
WLAN interface including external
antenna
Promag, Promass 500 digital transmitter
with display to Promag, Promass 500
digital transmitter with display and
WirelessHART interface including
external antenna
Conversion kit (contents)
1 × WLAN display with ribbon cable
and WLAN interface,
1 × tie-on label,
1 × conversion instructions
1 × WLAN display with ribbon cable
and WLAN interface including external
antenna,
1 × tie-on label,
1 × conversion instructions
1 × WirelessHART display with ribbon
cable and WirelessHART interface
including external antenna,
1 × tie-on label,
1 × conversion instructions
Personnel authorized to carry out conversion
1, 2, 3
1, 2, 3
4
EA01158D
1)
5