Activating The Application Packages Via The Onsite Display - Endress+Hauser Promag 100 Einbauanleitung

EA01249D
8 Activating the application packages via the onsite
display
8.1 Promag, Promass, Prosonic Flow, Prowirl 200, Promag 400,
t-mass 150
Note for E+H service technicians:
Log onto the device with the customer password via the "Maintenance" access level.
Navigation: in the display menu, select:
1
8.1.1 Activating application packages
1. Unlock the keypad (2 sec)
2. Main menu → Display language: select the language
3. Main menu → Expert → Entry code factory setting → 0000 or enter the entry code defined
by the customer (
4.1. t-mass 150: Expert → System management → Activate software option
4.2. Promag, Promass, Prosonic Flow, Prowirl 200, Promag 400: Expert → System →
Administration → Activate software option: activate software option(s)
5.Promag, Promass, Prosonic Flow, Prowirl 200, Promag 400:Main Menu → Expert →
System → Administration → Software option overview: the activated software option(s) is/are
displayed
8.1.2 Checking the data on the wired-on tag plate
• Device serial number
• New order code
• Software license code to be entered (appl. package code)
8
do not enter the service code)
Endress+Hauser